·       Capacitance between conductors = 98 pf/M (30 pf/ft)

·       Jacket thickness = 0.89mm     (0.035 in)

·       Conductor AWG = 20     (26 X 34)

·       Conductor material = ETP high-conductivity copper (99.95% pure copper). The high purity obtained from ETP copper results in microphone cable performance that is comparable to that of oxygen-free copper cables

·       Insulation & outer jacket material = EPDM Rubber (Ethylene Propylene Diene Rubber)

·       Operating temperature range = -50 deg. C to +90 deg.C     (-58 deg. F to 194 deg. F)

·       Maximum recommended pulling tension = 100 lbs

·       Minimum bend radius (install) / minor axis = 70 mm     (2.750 in)

·       EU ROHS Compliance = 01/01/2004

·       Nominal inductance = 0.055 uH/M     (0.18 uH/ft)

·       Nominal conductor DC resistance @ 20 deg. C = 32 ohm/1000M     (10.6 ohm/1000ft)

·       Nominal outer shield DC resistance @ 20 deg. C = 13.7 ohm/1000M     4.5 ohm/1000ft

·       Hand-soldered using quad eutectic solder

·       All-metal connector assembly

·       Various connector shell colors : Natural brass, Black, Red, Orange, Yellow, GrannyApple Green, Blue, Violet & White

·       Connector and cable welded together

·       2” plated spring steel strain relief